Advantages of thermal power plant are: Thermal power station has less initial cost as compared to hydro-electric generating station. It requires less space as compared to the hydro-electric power station. The fuel cost is less as compared
Flat plate collectors concentrating type collectors Absorber area is large. Absorber area is small. Concentration ratio is 1. Concentration ratio is high. It is uses both beam and diffuse radiation. It is uses mainly beam radiation. Application
There are factors of thermal power station: Availability of coal The hung amount of coal is required for generation of electrical energy. Thermal power station should be located near the coal mines so that transportation cost of
A generating station which converts heat energy of coal combustion into electrical energy is known as thermal power station. A thermal power station is a power station in which heat energy is converted to electric power. The
The characteristics of motors vary widely with the nature of their application and the type of duty they are expected to perform. For example, the applications like constant speed, constant torque, variable speed, continuous/intermittent duty, steep/sudden starts,
Following are the comparison between nuclear power plant and thermal power station. Nuclear power plant Thermal power station Where there is enough supply of water, away from thickly populated areas to avoid radioactive pollution. Power plant located
Necessity of transmission of electricity : Energy plays a very important role in day to day life for overall development of country. There are different forms of energy out of that the dependence of electrical of energy
The advantages of nuclear power station are as follows: The amount of fuel is quite small, hence there is a considerable saving in the lost of fuel transportation, storage, etc. A nuclear power station required less space
Advantages of pulverized coal It increases the efficiency of the boiler. It makes possible the use of wide variety of coal. It reduces time of raising temperature of steam. Combustion of pulverized coal can readily be adopted
The condenser needs large amount of cooling water to condense the steam. This cooling water is circulated from lake or river, by means of circulating water pump and is returned back to the source. If sufficient quantity