Electronics Articles Archive
The interconnection of electrical components like resistors, inductors, semiconductors devices, transformers and sources of e.m.f. is called as a network. The network consist a closed loop, which provides return path for the current. A network may contain
There are some advantages of π type filter which are given below, The quality of output DC voltage is very good. It has higher DC output voltage at heavy loads. It is easy to design. It has
There are some advantages of choke input (LC) filter are as given below, The choke input (LC) filter has a high output D.C voltage. It has no loading effect on the rectifier and power transformer. The diode
There are two thermocouples namely measuring thermocouple and balancing thermocouple. They forms a part of bridge at the input of DC amplifier. The same non linearity effect takes place in both the thermocouple, so this effect is compensated.
The basic construction of average responding voltmeter is shown in above fig. at the input side of an unknown voltage to be measured is applied. The blocking capacitor is used to block dc signals entering into the
There are some advantages of true RMS reading voltmeter which are given below, The true RMS value is measured independently of an input signal waveform. Because of the use of two thermocouples, the non linearity problem is
There are some advantages of series inductor (L) filter which are given below, The series inductor (L) filter reduces the ripple in the DC output of rectifier circuit. It has no surge current through diode. It has low
The metal region of schottky diode is heavily occupied with the conduction band electrons and the N type region is lightly doped. There are no minority carriers as in other types of diodes, but there are only
Enhancement mode : When the gate voltage is negative with respect to source, the depletion type MOSFET (metal oxide semiconductor field effect transistor) operates with an enhancement mode. The construction of N channel enhancement type MOSFET (metal
Depletion mode : When the gate voltage is positive with respect to source, the depletion type MOSFET (metal oxide semiconductor field effect transistor) operates in depletion mode. The construction of depletion type N channel MOSFET (metal oxide