Author Archive
Advantages and disadvantages of mesh storage CRT (cathode ray tube)
There are some advantages of mesh storage CRT (cathode ray tube) which are given below, The mesh storage CRT has a higher bandwidth. It has a high speed operation. The transients can be easily captured and stored.
Advantages and applications of polyphase rectifiers
There are some advantages of polyphase rectifiers which are given below, It has a large amount of power, usually greater than 2 kW. Its efficiency is greater than as compared to single phase rectifier. The ripple factor
What is feedback amplifier and what is its type?
Feedback amplifier: A feedback amplifier is that in which a fraction of the amplifier output is fed back to the input circuit. This partial dependence of amplifier input on its output helps to control the output. Types
Different types of SCR (silicon controlled rectifier) gate triggering
The process of turning ON SCR (silicon controlled rectifier) is called as triggering. The various methods of SCR triggering by gate control are given below. Triggering by dc gate signal. Triggering by pulse gate signal. Triggering by
Difference between SCR and DIAC
The difference of SCR (silicon controlled rectifier) and DIAC (diode alternating current) are given below, SCR DIAC The SCR stands for silicon controlled rectifier. The DIAC stands for diode alternating current. The SCR is a four layers
Advantages and disadvantages of negative feedback amplifier
There are some advantages of negative feedback amplifier which are given below, The negative feedback reduces noise. It has highly stabilized gain. It can control step response of amplifier. It has less harmonic distortion. It has less amplitude distortion.
Triggering modes of TRIAC (Triode for alternating current)
The following are the triggering modes of TRIAC (Triode for alternating current). I + mode : The ‘I’ indicates first quadrant operation. The MT2 (main terminal 2) positive with respect to MT1 (main terminal 1). The ‘+’
Applications of LASCR (Light activated silicon control rectifier)
There are some important applications of LASCR (Light activated silicon control rectifier) which are given below, The light activated silicon control rectifier (LASCR) is used in high voltage and high current applications. The LASCR is used in
V-I characteristic of GTO (Gate turn OFF thyristor)
The GTO stands for gate turn OFF thyristor. The GTO is a three terminal device. The terminals names are anode, cathode and gate. It can be turned ON by applying a pulse of positive gate current and
Applications of gate turn OFF thyristor (GTO)
There are some applications of gate turn OFF thyristor (GTO) are given below, It is used in high performance drive systems, such as the field oriented control scheme used in rolling mills, robotics and machine tools. It