Author Archive
Comparison between electric drive and mechanical drive
Electric drive Mechanical drive electric drive is dependent of electric supply, electric traction system is tried up to electrified routes only. It is self-contained unit and therefore can be suitable for any track. In case of failure
what is group drive ?
when one prime mover or motor is used for the number of machine tools on common shaft then the drive is called as group drive . it is also sometimes called as line shaft drive. Cost of
RISC architecture
RISC stands for reduced instruction set computer. It is a type of microprocessor architecture which utilizes a small, highly optimized instructions set rather than a more specialized set of instructions normally found in other types of architecture. Hence
Advantages, disadvantages and applications of FHSS
Advantages: There are some advantages of frequency hopping spread spectrum (FHSS) which are given below, It can be programmed to avoid some portions of spectrum . FHSS needs shorter time for acquisition. Very large bandwidth. Disadvantages: There
Difference between slow frequency hopping and fast frequency hopping
Following are the difference between slow frequency hopping and fast frequency hopping. Slow frequency hopping Fast frequency hopping In slow frequency hopping, multiple symbols are transmitted in one frequency hop. In fast frequency hopping, multiple hops are
CISC architecture
The CISC stands for complex instruction set computer. It is read only memory (ROM) based processor architecture which are designed with a full set of instruction that were intended to provide needed capabilities in the most efficient
Advantages and disadvantages and applications of time division multiplexing (TDM)
Advantages: There are some advantages of time division multiplexing which are given below, Time division multiplexing systems are more flexible than frequency division multiplexing. Time division multiplexing circuitry is not complex. Problem of cross talk is not
Difference between N-type semiconductors and P-type semiconductor
Following are the difference between N-type semiconductors and P-type semiconductor. N-type semiconductor P-type semiconductor It is type extrinsic semiconductor. It also type of extrinsic semiconductor. In N-type semiconductor, electrons are majority carriers and holes are minority carriers.
Advantages, disadvantages and applications of direct sequence spread spectrum (DSSS)
Advantages: There are some advantages of direct sequence spread spectrum which are given below, It has best discrimination against multipath signals. It avoids intentional interference such as jamming effectively. Performance of DSSS system in presence of noise
Block diagram of spread spectrum digital communication
The block diagram of spread spectrum digital communication is shown in above fig. the basic elements of a spread spectrum digital communication system with a binary information sequence at its input at the transmitting end and its